One machine.
Every format.
The U60 gives you access to every single Peleman cover — turning printed pages into a real hardcover book in 90 seconds. One machine binds every Peleman cover: hardcover, softcover, linen, clear, custom-printed. No warmup. No reconfiguration. No comb, no wire.
Ninety seconds is faster than reading about it.
One U60 unlocks every Peleman cover.
Every cover below uses the same U-shaped steel spine. The U60 binds all of them — no reconfiguration, no swap-out, no settings. Pick the finish your output deserves; the machine doesn't care.
Spine only. You supply the panels. The lowest price point in the ecosystem.
Clear or frosted plastic panels, no board. Clean, lightweight bound document.
Lay-flat construction. Material-wrapped or full-color printed and laminated. Real booklet feel.
Rigid board, cased-in construction. Soft-touch, linen, and material finishes. ~0.9 lb per cover.
Made to order. Same hardcover construction, fully branded. ~2-week lead, MOQ 10.
Get the machine and your first run of covers together.
The U60 alone is $220. Most buyers grab a starter pack of covers at the same time so they can bind the day it arrives.
U60 Machine + 10 Black Hard Covers
Everything you need to bind ten finished books from day one. Same-week shipping. Reorder covers any time.
- Unibind U60 binding machine
- 10 Black Hard Covers (80-sheet capacity)
- Full Peleman 1-year warranty
- Free US shipping
Seven industries. One machine.
Pick yours. We'll show the cover we'd recommend, the output it produces, and a dedicated page if you want to go deeper.
Win the listing before you walk in.
Listing presentations, buyer guides, pre-listing kits, recruitment kits. Agents who hand over a hardcover get the signature.
- KW · RE/MAX · eXp · C21 ready
- Branded with your brokerage
- Lay-flat for tabletop reviews
Bound the way the moment deserves.
Celebration of life books, memorial programs, guest books, aftercare packets. Linen finishes, lay-flat soft covers — the feel of a keepsake.
- No setup, no warmup — same-day
- Linen finishes for heirloom feel
- 4×6 keepsake to letter size
Sell finished books, not bound stacks.
Steel 360, Flex, and Hard Covers. On-demand small batch. AlphaGraphics, Minuteman Press operators — this is the upsell.
- Wide-format printable wraps
- MOQ 1 — quote any job
- Razor/blade margin on covers
Manuals that survive the semester.
Training manuals, course packets, student presentations, faculty reports. Volume-ready. Repeat-ready.
- 80 sheets in a single book
- Cohort-volume friendly
- Reorder same covers any term
Hand the audit committee a book.
Compliance packets, audit reports, financial plans, loan packages, SOP manuals. Executive appearance is the table-stakes.
- Locked structure — pages won't migrate
- Archive-grade durability
- Letter & tabloid sizes
Lay-flat photo books, on your desk.
Wedding albums, baby books, travel journals, scrapbooks. V-Paper lay-flat construction. 4×6 keepsake through letter.
- Lay-flat across the spread
- 4×6, 5×7, letter, tabloid
- Custom-printed covers
Every deck deserves a cover.
Proposals, board decks, RFP responses, agency portfolios. Anywhere a printed document leaves your hands.
- Add to any current print workflow
- Bind on-site, between meetings
- $220 desk-to-shelf
You spent two weeks on the deck. It's stapled.
Listing presentations, memorial programs, audit reports, training manuals — the work behind them is real. The way most people hand them over isn't. Loose paper and plastic folders don't read as 'this matters.' They read as 'office supply aisle.'
-
Three-ring binderslook like office supply
-
Wire Bindinglook like old office supply
-
Comb bindingscreams bad 'school report'
-
Plastic folderslast minute, careless
-
Loose stapled stacksIt's a pile not a presentation
Print. Insert. Bind. Ninety seconds.
The U60 is the simplest binding machine ever made: no warmup, no on/off switch, no settings. Plug it in. The cover triggers the bind. You hand over a real book.
Print your document on any printer. Letter, tabloid, 5×7, 4×6 — any sheet count up to 80.
Insert
Drop your stack into a Peleman cover. The U-shaped steel spine is pre-loaded with thermal resin.
Bind
Place it on the U60. The magnetic cover triggers the cycle. 90 seconds later — a finished book.
The spine is inside the book.
The U60 doesn't crimp, sew, or staple. It bonds a U-shaped steel channel — pre-loaded with thermal resin — directly into the cover. Ninety seconds of heat melts the resin around your printed sheets and re-solidifies them as a single, permanent block.
The result feels like a real book because, structurally, it is one. It's also why every Peleman cover is compatible with the same machine — the spine is the standard, and the U60 is the only thing that closes it.
-
Permanent steel-channel bondNo comb, no wire, no glue strip to peel apart.
-
Pages lay flat or near-flatSoft Covers open completely. Hard Covers sit open hands-free.
-
Universal cover compatibilitySame spine standard across every Peleman cover.
The honest comparison.
GBC and Fellowes make capable comb & wire binders. They make documents look bound. The U60 makes books. Those are different categories of finished product — and most buyers don't realize the second one is available at this price.
Comparison reflects standard GBC and Fellowes thermal/comb/wire binders. Specific SKUs vary.
Everything you'd want on a spec sheet, nothing you wouldn't.
One-page specs because there's nothing to manage. No buttons to learn. No settings to dial in. The magnetic cover is the entire user interface.
Everything you'd ask before a $220 decision.
The short answers most buyers ask in the first five minutes. If yours isn't here, we read every email.
Does the U60 really not need warmup?
Correct. There's no on/off switch and no warmup period. Plug it in, place a Peleman cover on the platform, and the magnetic switch starts the 90-second cycle automatically.
What's the difference between U60 and GBC / Fellowes binders?
GBC and Fellowes machines produce comb-bound and wire-bound documents — functional, but they don't look like books. Even their thermal binding options give you very limited types of covers that can be used. The U60 produces actual bound books (hardcover, softcover, linen) using a U-shaped steel spine bonded into the document. It's a different category of finished product.
Do I need different covers for different output formats?
yes and all covers come ready to use. You can choose from many sizes and types and all come with the U spine ready to activate the machine
How many books per hour can I bind?
Each cycle is 90 seconds, so realistically 30–35 books per hour with a steady operator. There's no cool-down between cycles.
What sheet sizes work with the U60?
The U60 binds 4×6, 5×7, letter (8.5×11), and tabloid (11×17) with the matching Peleman cover for each size. Maximum capacity is 80 sheets per book.
What's the warranty?
1 year manufacturer warranty from Peleman USA on every U60. If anything goes wrong, we handle it stateside — no shipping the machine to Europe.
Is shipping really free?
Yes, free US shipping on the U60 and on bundle orders. Most orders ship same week from our US facility.
Can I get fully branded covers for my business?
Yes. The Full-Color Custom cover line is made to order with edge-to-edge printing and lamination, ~2-week lead time, MOQ of 10. Same hardcover construction as our stock Hard Covers.
How is this different from probinding.com?
Peleman is the original manufacturer. probinding.com is a reseller. The cover ecosystem, the machine, the warranty, and the US support all come from the same source when you buy from pelemanusa.com.
Start binding today.
Make it Tangible.
One $220 machine. Every Peleman cover. Same-week US shipping. If the U60 doesn't outperform whatever you're using now, send it back.
